|
The ICRI, radio bridging device, is available in a wide range of optional configurations that allow it to be customized to meet the needs of public safety agencies, first responders and the military. The configurations listed below can be further tailored to meet your organization's specific requirements. Optional Configurations |
| "Standard" - 2 and 4 Talk Group, 5 Port | IP/Software Controlled |
|
|
 |
| Portable and rapidly deployable, radio interoperability in a small, rugged package. (Selection of the National Guard WMD/CST ADVON Vehicle communications cache) |
Remotely control talk group selection, audio level, COR or VOX selection and additional settings via a GUI, across a computer network. When power or Internet is unavailable, setup and operate without a computer or IP connection. |
| "2PED" - 2 Port, Environmental and Deep | "ICRI-E" - 2 Talk Group, 5 Port - Environmental |
 |
|
|
Tactical repeater - Designed to enhance communications in areas of poor RF propagation. (i.e. inside buildings, tunnels or caves) |
Environmental - built into a ruggedized, waterproof and sand-proof housing (Selection of DoD Guardian II Base Force Protection) |
| 4 Talk Group ,10 Port - Portable | 4 Talk Group, 10 Port - Rack Mount |
|
|
|
| Configured with VoIP/SIP, PSTN, SATCOM (Selected by National Guard CERF-P) | Configured with VoIP/SIP, PSTN, SATCOM. Designed for use in an Emergency Operations Center (EOC) or Mobile Command Vehicle |
| ICRI-to-MSAT/G2 Satellite Transceiver | |
|
|
|
|
Radio link to TACSAT - Interface portable or mobile radios, or other audio devices to the MSAT/G2 Satellite Transceiver |
|
