C-AT ComForce 10.4 Vehicle Intercom System
Multi-Radio Command Communication for Complex Operations
Authoritative control for secure, coordinated comms across every crew position and radio network.
ComForce 10.4 is a mission-critical vehicle communication system designed for command-level operations where multiple communication networks must be managed simultaneously.
Supporting up to 10 crew members and 4 radios, it enables structured coordination across command, tactical, and long-range communication channels.
MULTI-NETWORK
COMMAND-ENABLED
FULL-SPECTRUM
MISSION-CONFIGURABLE
Made in America
When Multiple Networks Must Work as One
Command vehicles operate in environments where communication is layered, continuous, and mission-critical.
Teams Must Coordinate Across
- Command nets
- Tactical and convoy communications
- Air and aviation channels
- Long-range and SATCOM links
without Structure
- Information becomes fragmented
- Critical updates are delayed
- Command loses visibility
ComForce 10.4 maintains control across these communication paths without adding system complexity.
Built for Command Platforms
ComForce 10.4 is purpose-built for command and coordination vehicles.
Oshkosh M-ATV
Joint Light Tactical Vehicle
Command and Control Vehicles
Law Enforcement Mobile Command Units
Homeland Security Coordination Platforms
Built for command and control, not just communication.
Multi-Radio Access Without System Overload
ComForce 10.4 supports up to four radios within a single system, enabling access to multiple communication networks.
One Active Radio Channel Per Operator
Clear, focused communication without competing audio streams
Separated Audio Paths
Clear separation between intercom and radio traffic
No Competing Streams
Focused communication maintains clarity in high-traffic environments
Focused communication maintains clarity in high-traffic environments.
Clean Signal Control in RF-Dense Environments
ComForce 10.4 creates a controlled communication environment across four radio networks.
Fully Isolated Audio Paths
Radio and intercom audio paths are fully isolated
No Cross-Interference
Radio transmissions are available to the crew without cross-interferene
No Signal Degradation
No signal degradation introduced by the intercom system
Maintains communication clarity even in congested RF environments.
Structured Communication Across the Command Team
Dedicated Control at Every Position
Each crew member operates through a dedicated Intercom Control Unit (ICU), enabling structured communication across all positions.
- Independent radio selection per operator
- Individual control of audio levels
- Clear separation between internal and external communication
Every Operator Maintains Control
The ICU gives each crew member full authority over their communication environment without impacting the rest of the team.
Every operator maintains control without impacting the team.
Communication Maintained at All Times
Intercom Always Active
Internal crew intercom remains active during radio transmission
No Interrupted Coordination
Crew coordination is never interrupted by external communication
Full Situational Awareness
Operators maintain situational awareness at all times
Tactical control
Built for High-Stress,
High-Load Operations
Operator-Focused Control Design
Command teams operate under constant pressure, managing multiple communication paths and responsibilities.
ComForce 10.4 is engineered to reduce system burden.
No system configuration required during operation
No software interfaces or menu navigation
Tactile, glove-compatible controls
Predictable, repeatable operation
Operator-Focused Control Design
- Distinct push-to-talk controls prevent accidental transmission
- Controls are identifiable by touch, even in low visibility
- Independent radio and intercom volume adjustment
Designed for operation under stress -not system management
Radio Capability Fully Preserved
ComForce does not replace or alter radio functionality.
What Stays Intact
- All radio capability remains within connected systems
- No changes to radio configuration or behavior
- No loss of performance or encryption capability
The ComForce Principle
The radios do the work.
ComForce ensures command can use them effectively.
Optimized for Vehicle Integration
SWaP Advantage
ComForce 10.4 is designed for vehicle environments where size, weight, and power constraints matter.
SWaP Specifications
- Compact system footprint for command vehicles
- Low power consumption across full operation
- Wide operating voltage range (+11 to +31 VDC)
- Integrated spike protection and power conditioning
Why It Matters
Command vehicles have strict constraints on available space, weight capacity, and power draw.
ComForce is engineered to fit precisely within those limits.
signed to operate reliably within vehicle power and space constraints.
Rugged for Degraded and Contested Environments
ComForce 10.4 is built to perform in real-world operational conditions.
Heavy-Gauge Aluminum Construction
Sealed connectors, resistant to shock, vibration, and environmental exposure
Extreme Temperature Range
Operates from -30°F to +140°F
Maintains performance in degraded and contested environments
comforce 10.4
Built for Integration and Future Growth
ComForce 10.4 integrates seamlessly into existing vehicle systems while supporting future expansion.
Fits Existing Architectures
No Radio Replacement
Modular Design
Simple Installation
self contained modular design supports evolving mission requirements
delivers advanced capability without increasing integration complexity.
Expand to Full Communications Integration
ComForce 10.4 operates as a command-level communication system within the vehicle. When mission requirements expand, it integrates with the ICRI interoperability platform.
With ICRI Integration,
ComForce 10.4 Provides:
- Access to all connected communication systems
- Interoperability across agencies and radio networks
- VoIP communications when required
- SATCOM long-haul communications when required
- Beyond-line-of-sight (BLOS) communication extension
Command Maintains Control
All extended capabilities are accessible through the same crew interface. Command maintains control without changing workflow.
Why ComForce 10.4
Command-level communication without added complexity.
Multi-Radio Command Communication
Structured coordination across multiple communication nets
Reduced Cognitive Load
Engineered for high-stress environments
Full Radio Capability Preserved
No changes to connected radio systems
SWaP Optimized
Designed for vehicle power and space constraints
Rugged Construction
Built for degraded and contested environments
Modular Expansion
Expandable through ICRI for interoperability, VoIP, and SATCOM
No Added Complexity
Command-level capability without system management burden
Radio & Headset Agnostic
Supports existing tactical radios and headset systems
Reduced Operator Burden
Vehicle-mounted controls accessible with tactical gear
Get Started
Speak to an Engineer
Configure ComForce 10.4 for your command vehicle and operational environment.
Our engineers work directly with program managers and integrators to configure ComForce 10.4 for your specific platform and mission requirements.
1
Discuss Requirements
Share your vehicle platform and communication needs
2
Configure the System
Tailor ComForce 10.4 to your operational environment
3
Deploy with Confidence
Repeatable, program-level integration
Technical Specifications at a Glance
Operator Pro can be deployed with agency-managed or C-AT-provided network equipment.
4
Radios
Simultaneous radio networks integrated
-30°–140°F
Temperature Range
Extreme environment operation
+11–31V
Operating Voltage
Wide vehicle power range (VDC)
10
Users
Maximum crew positions supported
Construction
- Heavy-gauge aluminum chassis
- Sealed connectors
- Shock and vibration resistant
Power
- Integrated spike protection
- Power conditioning built-in
- Low consumption across full operation
mission-critical
System Configuration Options
ComForce is available in multiple configurations to match your crew size and radio requirements.
ComForce 5.2
5-user / 2-radio
For smaller crew platforms with two communication networks
ComForce 10.4
10-user / 4-radio
Full command configuration for complex multi-network operations
custom
Program-specific Configured to your platform and mission requirements
Speak to an engineer to determine the right configuration for your vehicle
Control over complexity
Radios introduce expanded capability along with operational load.
ComForce structures multi-radio voice environments into controlled, mission-ready crew communications, reducing operator burden and preventing audio congestion under stress.
Common Applications
ComForce 10.4 is used in environments requiring structured, multi-network communication control.
Defense Command Vehicles
APCs, JLTVs, and command platforms requiring multi-radio coordination
Joint Operations
Environments requiring simultaneous command, tactical, and air channel access
Law Enforcement Mobile Command
Mobile command units managing multiple agency communication networks
Homeland Security Coordination
Platforms requiring interoperability across agencies and long-range communication
custom
Program-specific Configured to your platform and mission requirements
Speak to an engineer to determine the right configuration for your vehicle
Operational Environments:
Military Tactical Operations
Armored Convoys
BearCat APC deployments
JLTV / MRAP / Command vehicles
Disaster Response & Mutual Aid
Infrastructure-Denied Operations
Multi-Agency Command & Control
Remote & Hard-to-Reach Environments
All models maintain radio-agnostic compatibility across military and commercial mobile radio platforms and headset systems.
Compatible with Tactical Radio Waveforms
ComForce integrates with radios operating across a wide range of military communicaton standards.
Sincgars
Single Channel Ground and Airborne radio system
muos
Mobile User Objective System
HF
Long-Range Voice (ALE / Beyond Line-of-Sight)
P25 / DMR / TETRA
Public Safety & Digital LMR
VHF/UHF
Analog & Digital Tactical Communications
satcom / dama
MUOS, DAMA, L-Band Voice
LTE / 5G PTT
Mission-Critical Push-to-Talk (MCPTT / FirstNet)
MANET / SDR
Mesh & Software-Defined Radios (MPU5, Silvus)
Comforce preserves full radio capability while enabling controlled access
DESIGNED FOR U.S. AND ALLIED MILITARY PLATFORMS
ComForce supports U.S. military tactical vehicles, federal agencies, and approved allied defense programs.
Engineered for integration into JLTV, MRAP, BearCat APC, convoy response vehicles, armored personnel carriers, and mobile command platforms operating in military tactical environments.
Supports ground vehicles, mobile command posts, maritime platforms, and expeditionary communication systems.
ComForce is specified and integrated by:
• Defense system integrators
• Vehicle OEMs and upfitters
• Prime contractors
• Government program offices
• International military modernization programs
• Tactical fleet program managers
Deployed across multiple U.S. and allied operational programs.
ComForce systems are available for U.S. Government programs
and approved allied defense partners in accordance with applicable U.S. export regulations.
How the
ComForce Vehicle Intercom System
Works
• IMU (Intercom Master Unit)
• ICU (Intercom Control Unit)
• Radio ports
• Headset integration
• Crew station scaling
ComForce 10.4 - Frequently asked questions
Can users monitor all radios at the same time?
Yes. All users can monitor connected radio channels while selecting one for transmission.
Does ComForce replace or modify connected radios?
No. ComForce does not alter radio functionality, configuration, or encryption capability.
Can ComForce integrate with existing vehicle radios?
Yes. ComForce 10.4 integrates with existing tactical and mobile radio systems without requiring radio replacement or reconfiguration.
Is ComForce compatible with mixed radio fleets?
Yes. ComForce is designed to support mixed and transitioning radio environments, including legacy, modernized, and software-defined radio platforms.
What types of radios can be connected?
ComForce supports tactical mobile and portable radios, mesh radios, SATCOM systems, and additional communication platforms as required by mission needs.
Is ComForce suitable for command vehicles?
Yes. ComForce 10.4 is commonly deployed in mobile command vehicles, armored platforms, convoy operations, and mission coordination environments.
Does ComForce reduce crew communication overload?
Yes. ComForce provides structured communication control that reduces overlapping traffic and improves crew coordination during high-tempo operations.
What platforms is ComForce commonly installed in?
ComForce is commonly integrated into armored personnel carriers, JLTVs, BearCat vehicles, command vehicles, tactical response platforms, and homeland security vehicles.
Is ComForce designed for armored vehicles?
Yes. ComForce is designed for armored personnel carriers, tactical command vehicles, and mission-specific mobile platforms.
How many crew positions does ComForce 10.4 support?
ComForce 10.4 supports up to ten crew positions with coordinated intercom and radio access control.
Can ComForce be installed in existing vehicles?
Yes. ComForce 10.4 supports both new vehicle integration and retrofit installation programs for existing tactical and command vehicle fleets.
What are the power requirements?
ComForce operates on +11 to +31 VDC with integrated spike protection and power conditioning.
Does ComForce support high-noise vehicle environments?
Yes. ComForce is engineered for armored and tactical vehicle environments where vibration, engine noise, and crew coordination are operational challenges.
Can ComForce expand to support interoperability?
Yes. ComForce integrates with the ICRI platform to support VoIP, SATCOM, and cross-agency interoperability.
Can agencies procure ComForce through existing contract vehicles?
Yes. C-AT supports multiple government procurement pathways including cooperative purchasing programs, GSA-aligned acquisition support, and agency purchasing programs.
Is ComForce Made in the USA?
Yes. ComForce systems are designed and manufactured in the United States.
Procurement and Deployment
ComForce systems are acquired and deployed as part of vehicle communication and integration programs.
Each system is configured based on vehicle platform, number and type of radios, crew size and configuration, and operational requirements.
Acquisition Options
- Direct purchase
- Integration through vehicle manufacturers
- System integrators and partners
- Inclusion in larger communication or vehicle programs
Program Integration
- Integration into new vehicle builds
- Deployment across fleet programs
- Repeatable configurations for multi-unit procurement
- Systems configured prior to delivery
What to expect
- Vehicle type and layout
- Number of users and radios
- Communication requirements
- Integration approach
Systems are delivered ready to integrate into the vehicle environment.
Procurement & Government Purchasing
• Designed for vehicle OEM integration
• Supports modernization programs
• Supports mixed fleets
• Integrates into new builds and retrofit programs
Government agencies can procure C-AT systems through multiple streamlined purchasing paths:
• Cooperative contracts
• P-Card purchasing
• Government buying programs – GSA
• Funding and grant-supported procurement
• Compliance-ready acquisition options
C-AT supports rapid procurement for time-sensitive missions and emergency deployments.
RADIO-AGNOSTIC VEHICLE INTERCOM CAPABILITY FOR YOUR FLEET
Maintain structured crew communications in high-noise, high-stress, and degraded environments.